LED strip SMD 3528 12V 4.8W/m RGB 60LED/m IP33 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 3528 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip requires a PWM controller supporting the 3 control channels used by the RGB configuration.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

An RGB LED strip uses three independent color channels: red, green, and blue. By adjusting their relative brightness levels, it is possible to produce a very wide range of colors, including smooth color transitions, dynamic lighting effects, and white light created by activating all three channels simultaneously. Red, green, and blue are the primary colors of the additive color model, and the characteristics of red, green, and blue LEDs are stable, repeatable, and well understood — which is why these particular colors are used.

The strip requires a compatible 3-channel RGB controller that independently regulates the intensity of each color channel, most commonly using PWM modulation. Different output colors — other than the three primary colors — are obtained by varying the relative intensity of the red, green, and blue channels. Depending on the controller used, the user can select colors, adjust brightness, and activate predefined lighting scenes and dynamic effects.

RGB LED strips are designed primarily for decorative, effect, and ambient lighting of interiors, furniture, ceilings, display cases, and architectural elements.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP33 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED strip 300LED SMD 3528 RGB is a versatile choice for stylish accent lighting with a great balance of brightness and power use. It delivers stable colors and an even glow, so your project looks clean and premium. Use it for mood lighting, highlights, and decorative effects in homes or commercial spaces.

LED strip 300LED SMD 3528 RGB – where it works best

This LED strip 300LED SMD 3528 RGB fits projects that need flexible installation and reliable color output. It works well in aluminum profiles, which improves finish and helps heat dissipation. Choose it for modern interiors, displays, or subtle architectural accents.

• Backlighting for furniture, shelves, cabinets, and niches
• Ceilings, coves, skirting details, and decorative trims
• Showcases, signage, and product displays
• Aluminum LED profiles for a neat, premium look

SMD 3528 RGB technology explained

SMD 3528 LEDs are a proven standard for decorative lighting. They offer consistent operation and repeatable visual results. RGB lets you create many colors and dynamic scenes. Add a matching controller to adjust color, brightness, and modes.

RGB LED tape with 300 LEDs – installation and power

Mount the strip using its adhesive backing on a clean, degreased surface. Cut only at marked cut points. Connect sections using soldering or quick connectors. Pick a constant-voltage power supply with a 20–30% reserve for stable performance.

For longer runs, use power injection to prevent voltage drop and color shift. With 12V systems, feed power about every 5 m. With 24V systems, feed power about every 10 m. Look for protections like OVP, OCP, SCP, and OTP for safer, premium-grade setups.

Why choose LED strip 300LED SMD 3528 RGB

• Stable RGB colors for clean accents and scenes
• Good LED density for smooth decorative lighting
• Easy mounting in profiles and tight spaces
• Cuttable and extendable for custom layouts

FAQ

Which power supply should I choose?
Calculate total wattage and add 20–30% headroom. Choose a model with key protections for reliability.

When do I need power injection?
Use it for longer sections or when brightness drops at the end. It helps keep color and output consistent.

Can I cut and reconnect the strip?
Yes, cut only at the marked points. Soldering is the most durable option.

Build premium lighting fast. Choose the LED strip 300LED SMD 3528 RGB, add a controller and power supply, and finish your project with a clean, professional look. Order now at LEDownia.pl.