LED strip SMD 5050 12V 14.4W/m RGB 60LED/m IP33 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 5050 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip requires a PWM controller supporting the 3 control channels used by the RGB configuration.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

An RGB LED strip uses three independent color channels: red, green, and blue. By adjusting their relative brightness levels, it is possible to produce a very wide range of colors, including smooth color transitions, dynamic lighting effects, and white light created by activating all three channels simultaneously. Red, green, and blue are the primary colors of the additive color model, and the characteristics of red, green, and blue LEDs are stable, repeatable, and well understood — which is why these particular colors are used.

The strip requires a compatible 3-channel RGB controller that independently regulates the intensity of each color channel, most commonly using PWM modulation. Different output colors — other than the three primary colors — are obtained by varying the relative intensity of the red, green, and blue channels. Depending on the controller used, the user can select colors, adjust brightness, and activate predefined lighting scenes and dynamic effects.

RGB LED strips are designed primarily for decorative, effect, and ambient lighting of interiors, furniture, ceilings, display cases, and architectural elements.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP33 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED strip 300LED SMD 5050 RGB Premium is built for clean, consistent color and reliable everyday use. It balances LED density and power draw, so it fits many projects. The SMD 5050 chips deliver strong RGB mixing and smooth effects. It works perfectly for aluminum profiles and modern accent lighting. Use it when you want premium components and predictable results.

Why choose the RGB LED strip 300LED SMD 5050?

This premium strip gives you rich colors, dynamic scenes, and stable output. The 5050 package is known for strong brightness and solid color blending. It is a smart choice for home, retail, and light commercial installations.

• 300 LEDs for even light distribution
• SMD 5050 RGB for vivid multi-color effects
• Premium-grade components for dependable performance
• Easy integration with controllers, dimmers, and profiles

Installation tips for RGB LED strip 300LED SMD 5050

Choose a constant-voltage power supply matched to your total load. Add a 20–30% power reserve for stability. For long runs, avoid voltage drop with power injection. Feed power about every 5 m for 12V systems. Feed power about every 10 m for 24 V systems. Use a star wiring layout and the correct wire gauge.

Mounting and cutting

Cut only at marked cut points. Connect using soldering or quality connectors. An aluminum profile improves heat dissipation and extends lifespan. Protect connections from moisture in outdoor setups.

Recommended protection features

• OVP: over-voltage protection
• OCP: over-current protection
• SCP: short-circuit protection
• OTP: over-temperature protection

Best uses for RGB LED strip 300LED SMD 5050

• cabinet, shelf, and niche lighting
• ceilings, coves, and architectural accents
• signage, displays, and exhibition stands
• aluminum profiles and decorative lines of light

FAQ

Which power supply should I choose?
Calculate total wattage for all sections, then add 20–30% headroom. Pick a unit with OVP, OCP, SCP, and OTP.

When do I need power injection?
Use it for long runs or higher LED density. It keeps brightness consistent across the whole strip.

Can I cut and reconnect the strip?
Yes, at cut marks. Soldering gives the most reliable connection.

Explore compatible accessories: Other LED strips | LED power supplies | Controllers and dimmers

Ready to upgrade your lighting? Choose this premium RGB strip and order from LEDownia.pl today.