LED strip SMD 5050 12V 19.2W/m RGBWW 60LED/m IP20 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 5050 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip requires a PWM controller supporting the 4 control channels used by the RGBWW configuration.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

An RGBW LED strip combines three independent color channels — red, green, and blue — with an additional channel of native white light produced by a phosphor-converted LED. Unlike a standard RGB strip, white light is not simulated by mixing the three colors, but generated by dedicated white LEDs, making it more natural, efficient, and suitable for functional lighting as well.

Depending on the version, the additional channel may emit warm white light — RGBWW, neutral white — RGBNW, or cool white — RGBCW. The designation RGBW is also commonly used as a general term for this four-channel family of LED strips.

The strip requires a compatible 4-channel RGBW controller that independently regulates the R, G, B, and W channels, most commonly using PWM modulation. This allows the user to select colors, adjust brightness, activate dynamic effects, and use a full-quality white light channel.

RGBW LED strips combine decorative color lighting with practical white illumination. They are intended for advanced lighting installations in furniture, ceilings, recesses, display cases, and architectural features where a single system is expected to provide both color scenes and everyday functional lighting or illumination.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP20 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED strip 300LED RGBWW Premium is built for clean, even light and dependable performance. It balances LED density and power draw, so it works in many projects. RGBWW gives you full color effects plus warm and cool white tones. Premium components help keep light stable and consistent. This makes it a smart choice for accent lighting and profile installations.

Why choose LED strip 300LED RGBWW Premium

This LED strip 300LED RGBWW Premium uses efficient SMD technology and selected diodes. You get smooth light lines in aluminum profiles and a wide range of scenes. Use saturated colors for mood, then switch to white for everyday tasks. It is a practical solution for homes, retail, and commercial interiors.

RGBWW LED strip for profiles: where it works best

• Cabinets, shelves, and niches for clean accent light
• Ceilings, coves, and architectural highlights
• Displays, signage, and product presentation
• Aluminum profiles for better cooling and finish

LED strip 300LED RGBWW Premium: power supply and wiring

Choose a constant-voltage LED power supply matched to total wattage. Add a 20–30% safety margin for stability. Look for protections like OVP, OCP, SCP, and OTP. Models with active PFC can improve efficiency and working culture.

To avoid voltage drop, use power injection on longer runs. For 12V, feed power about every 5 m. For 24V, feed power about every 10 m. Use a star wiring layout when possible. Select wire gauge to match current and distance. For outdoor or humid areas, seal connections against moisture.

Installation and daily use

Cut the strip only at marked cut points. Connect with soldering or quality connectors. The adhesive backing speeds up mounting. An aluminum profile improves heat dissipation and helps the strip last longer. Pick the protection rating that fits your environment.

FAQ

• Which power supply should I choose? Add up the wattage of all sections and add 20–30% headroom. Prefer units with OVP/OCP/SCP/OTP.
• When do I need power injection? When runs are long or LED density is high. Extra feeding keeps brightness even.
• Can I cut and reconnect the strip? Yes, at cut points. Use proper tools and safe soldering temperature.

Order and build your lighting

Pick the right supply and wiring, then enjoy smooth RGBWW scenes. Order LED strip 300LED RGBWW Premium at LEDownia.pl and create premium lighting today.

See also: Other LED strips | LED power supplies | Controllers and dimmers