LED strip SMD 12V 19.2W/m RGBCW 60LED/m IP65 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 5050 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip requires a PWM controller supporting the 4 control channels used by the RGBCW configuration.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

An RGBW LED strip combines three independent color channels — red, green, and blue — with an additional channel of native white light produced by a phosphor-converted LED. Unlike a standard RGB strip, white light is not simulated by mixing the three colors, but generated by dedicated white LEDs, making it more natural, efficient, and suitable for functional lighting as well.

Depending on the version, the additional channel may emit warm white light — RGBWW, neutral white — RGBNW, or cool white — RGBCW. The designation RGBW is also commonly used as a general term for this four-channel family of LED strips.

The strip requires a compatible 4-channel RGBW controller that independently regulates the R, G, B, and W channels, most commonly using PWM modulation. This allows the user to select colors, adjust brightness, activate dynamic effects, and use a full-quality white light channel.

RGBW LED strips combine decorative color lighting with practical white illumination. They are intended for advanced lighting installations in furniture, ceilings, recesses, display cases, and architectural features where a single system is expected to provide both color scenes and everyday functional lighting or illumination.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP65 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED strip SMD 12V RGB+CW IP65 60LED/m – premium light for everyday and accent use

LED strip RGBW - RGBCW (300led) is a smart balance of diode density and power draw. It works great in LED profiles and modern accent installations. The RGBW system gives vivid colors plus clean white light. That makes it practical for daily lighting. Build with premium components for stable output and long service life.

Why choose this LED strip SMD 12V RGB+CW IP65 60LED/m?

• RGB + Cold White for both mood lighting and functional illumination.
• 60LEDs per meter for smooth, even light lines in aluminum profiles.
• Easy installation with adhesive backing and simple routing.
• Cuttable design at marked points for precise lengths.

Installation tips

Use an aluminum profile when possible. It improves cooling and keeps the light line clean. Clean and degrease the surface before mounting. Cut only at marked points. For best reliability, connect with soldering or quality connectors.

Power supply and voltage drop (constant voltage LED power supply)

Choose a constant voltage power supply matched to your total wattage. Add a 20–30% power reserve for stable work. Look for protections like OVP, OCP, SCP, and OTP. Active PFC models can improve efficiency and operation.

For longer runs, use power injection to avoid brightness drop. Feed power every about 5 m for 12V systems. Feed every about 10 m for 24 V systems. Use a star wiring layout and proper cable gauge. Protect outdoor connections from moisture.

RGB+CW 60LED/m for modern accent lighting

This RGB+CW LED strip

fits furniture lighting, shelves, niches, and ceiling coves. It also works well for displays, signage, and architectural accents. You can tune colors for ambiance. Switch to white for clear daily light. It is a premium choice for clean, modern interiors.

FAQ

Which power supply should I choose?
Sum the wattage of all sections and add 20–30% reserve. Choose a unit with OVP/OCP/SCP/OTP protections.

When do I need power injection?
Use it for long runs or higher LED density. It keeps brightness even across the whole strip.

Can I cut and reconnect the strip?
Yes, cut only at marked points. Soldering gives the most durable connection.

Ready to upgrade your lighting? Choose this LED strip and order today from LEDownia.pl.

See also: Other LED strips | LED power supplies | Controllers & dimmers