LED strip SMD 5050 12V 19.2W/m RGBCW 60LED/m IP65 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 5050 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip requires a PWM controller supporting the 4 control channels used by the RGBCW configuration.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

An RGBW LED strip combines three independent color channels — red, green, and blue — with an additional channel of native white light produced by a phosphor-converted LED. Unlike a standard RGB strip, white light is not simulated by mixing the three colors, but generated by dedicated white LEDs, making it more natural, efficient, and suitable for functional lighting as well.

Depending on the version, the additional channel may emit warm white light — RGBWW, neutral white — RGBNW, or cool white — RGBCW. The designation RGBW is also commonly used as a general term for this four-channel family of LED strips.

The strip requires a compatible 4-channel RGBW controller that independently regulates the R, G, B, and W channels, most commonly using PWM modulation. This allows the user to select colors, adjust brightness, activate dynamic effects, and use a full-quality white light channel.

RGBW LED strips combine decorative color lighting with practical white illumination. They are intended for advanced lighting installations in furniture, ceilings, recesses, display cases, and architectural features where a single system is expected to provide both color scenes and everyday functional lighting or illumination.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP65 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED tape RGBW 300LED – premium light with cool white

LED strip RGBW 300LED RGBW + biała zimna is built for balanced brightness and sensible power use. It gives you colorful RGB effects and a clean cool white channel. This makes it ideal for modern interiors and practical task lighting. The strip works great in aluminum profiles, where heat is managed better. Choose it when you want premium quality and reliable everyday performance.

Why choose an RGBW LED strip with cool white

An RGBW LED strip with cool white lets you switch between mood lighting and crisp illumination. Cool white improves contrast and makes surfaces look clean. It works well in kitchens, offices, and display areas. RGB adds creative scenes for evenings and events. You can mix channels to match your style and the room’s function.

Key benefits

• RGBW control for color scenes plus true cool white light.
• 300 LEDs for even light in profiles and accents.
• Premium build for stable output and long service life.
• Easy installation with cut points and simple connections.

LED tape RGBW 300LED: power supply, safety, and voltage drop

Pick a constant-voltage power supply matched to total wattage. Add a 20–30% reserve for stable work. Look for protections like OVP, OCP, SCP, and OTP. Active PFC models often run smoother and cooler.

Long runs can dim at the far end due to voltage drop. Use power injection to keep brightness even. For 12V systems, feed power about every 5 m. For 24V systems, feed power about every 10 m. Use a star wiring layout and proper cable gauge. Seal connections if you install in humid areas.

Installation and use cases

• Under-cabinet lighting and shelves.
• Ceiling coves, niches, and architectural accents.
• Signage, exhibitions, and display lighting.
• Aluminum profiles for clean lines and better cooling.

You can cut the strip only at marked cut points. Connect by soldering or quality connectors. A profile improves heat dissipation and boosts durability. Clean the mounting surface before applying the adhesive backing.

FAQ

Which power supply should I choose?
Sum the wattage of all sections and add 20–30% headroom. Choose a unit with OVP/OCP/SCP/OTP protections.

When do I need power injection?
Use it for long runs or higher LED density. It prevents dimming and color shift at the end of the strip.

Can I cut and reconnect the strip?
Yes, only at cut marks. Soldering gives the most reliable connection.

Order from LEDownia.pl

Upgrade your space with premium lighting that looks great and works reliably. Choose LED strip RGBW 300LED RGBW + biała zimna, match the right power supply, and enjoy clean cool white plus vivid colors. Add to cart and order today.

See also: Other LED strips | LED power supplies | Controllers & dimmers