- Online only
- New
LED power supply Tridonic LCA 100W 350-1050mA 4xCH lp PRE
LED power supply Tridonic LCA 100W 350-1050mA 4xCH lp PRE is a constant current LED driver rated up to 100 W. Values for individual settings are shown in the operating-point table. Documented interfaces and configuration methods: DALI, switchDIM.
LED power supply Tridonic LCA 100W 350-1050mA 4xCH lp PRE
619.00 PLN
Shipment in 8-10 working days
zas_tridonic_28001912
LED power supply Tridonic LCA 100W 350-1050mA 4xCH lp PRE is a constant current LED driver rated up to 100 W. Values for individual settings are shown in the operating-point table. Documented interfaces and configuration methods: DALI, switchDIM.
Delivery
1-3 dni (PL), 3-10 dni (non-PL)
Privacy Policy
Return Policy
14 days
LED power supply Tridonic LCA 100W 350-1050mA 4xCH lp PRE is a constant current LED driver in the Driver LCA 100W 350–1050mA 4xCH lp PRE family. Official article number 28001912 identifies this physical version.
Key properties
Common and exact-article specifications are kept separate from operating points. Power, LED voltage, efficiency and temperatures may depend on settings and load; the complete multi-row manufacturer data is shown below.
Technical specifications
| Manufacturer article number | 28001912 |
|---|---|
| Manufacturer family | Driver LCA 100W 350–1050mA 4xCH lp PRE |
| Manufacturer product group | Linear drivers |
| Supply voltage | 220 – 240 V |
| AC voltage range | 198 – 264 V |
| DC voltage range | 176 – 288 V |
| Mains frequency | 0 / 50 / 60 Hz |
| Overvoltage protection | 320 V AC, 48 h |
| Typ. current (at 230 V, 50 Hz, full load) | 184–488 mA |
| Typ. current (220 V, 0 Hz, full load, XX % dimming level) | 87 mA |
| Leakage current | <0.5 mA |
| Typ. input current in no-load operation | 22 mA |
| Typ. power input on stand-by 230 V | <0.25 W |
| Typ. input power in no-load operation | <0.5 W |
| Typ. efficiency at 230 V | 90 % |
| λ over full operating range (max.) | 0.98 |
| THD at 230V, full load | <8 % |
| Starting time | <0.6 s; <0.3 s |
| Switchover time (AC/DC) | <0.2 s |
| Turn off time | <0.02 s |
| Output current tolerance, min./full load | ±4 % |
| Max. output current peak (non-repetitive) + max. peak output current | ≤ output current +20 % |
| Output LF current ripple (< 120 Hz) / Current ripple at full load | ±4 % |
| Output P_ST_LM (at full load) | ≤1 |
| Output SVM (at full load) | ≤0.4 |
| Max. output voltage | 60 V |
| Dimming range | 1–100 % |
| Mains surge capability (between L - N) | 1 kV |
| Mains surge capability (between L/N - PE) | 2 kV |
| Surge voltage at output side (against PE) | <0.5 kV |
| Type of protection | IP20 |
| Length | 360 mm |
| Width | 40 mm |
| Height | 21 mm |
| Lifetime | up to 100000 h |
| Guarantee | 5 years |
| Output mode | CC |
| Maximum output power [W] | 100 |
| Input voltage | 220 – 240 V |
| IP grade | IP20 |
| Warranty [years] | 5 |
| THD | <8 % |
| Typ. efficiency at 230 V | 90 % |
| λ over full operating range (max.) | 0.98 |
| Dimensions L×W×H | 360 × 40 × 21 mm |
| Lifetime [h] | up to 100000 h |
| Product net weight | 0.352 kg |
| Interfaces and configuration | DALI, switchDIM |
| Dimming / control | DALI, switchDIM |
| Dimming | Yes |
| short_circuit_protection | Yes |
| overload_protection | Yes |
| no_load_protection | Yes |
| Manufacturer note: Product description | NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) |
| Manufacturer note: Product description | Dimmable built-in constant current 4-channel LED driver with DALI DT6 |
| Manufacturer note: Product description | Dimming range 1 to 100 % |
| Manufacturer note: Product description | Suitable for luminaires of protection class I and protection class II (see data sheet chapter 3.4 for details) |
| Manufacturer note: Product description | Output current adjustable between 350 – 1,050 mA for each channel |
| Manufacturer note: Product description | Max. output power 100 W (devided in 2 x 50 W) |
| Manufacturer note: Product description | Up to 90 % efficiency |
| Manufacturer note: Product description | Power input on stand-by < 0.25 W |
| Manufacturer note: Product description | Nominal lifetime up to 100,000 h |
| Manufacturer note: Product description | 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions) |
| Manufacturer note: Housing properties | Low profile metal casing with white cover |
| Manufacturer note: Housing properties | Type of protection IP20 |
| Manufacturer note: Interfaces | one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION V2) |
| Manufacturer note: Interfaces | proportionSWITCH |
| Manufacturer note: Interfaces | Terminal blocks: 0° push terminals |
| Manufacturer note: Functions | Adjustable output current in 1-mA-steps (DALI) or with resistor plug (I-SELECT 2) |
| Manufacturer note: Functions | Constant light output function (CLO) |
| Manufacturer note: Functions | proportionSWITCH with pre defined scenes (split between different channel scenes) |
| Manufacturer note: Functions | switchDIM and proportionSWITCH with memory function |
| Manufacturer note: Functions | Power-up fading and fade2zero |
| Manufacturer note: Functions | Configurable via DALI |
| Manufacturer note: Functions | Protective features (overtemperature, short-circuit, overload, no-load, reduced surge amplification) |
| Manufacturer note: Functions | Intelligent Voltage Guard (overvoltage and undervoltage monitoring) |
| Manufacturer note: Functions | Suitable for emergency escape lighting systems acc. to EN 50172 |
| Manufacturer note: Benefits | Flexible configuration via companionSUITE |
| Manufacturer note: Benefits | Application-oriented operating window for maximum compatibility |
| Manufacturer note: Benefits | Best energy savings due to low stand-by losses |
| Manufacturer note: Benefits | Flexible configuration via DALI and I-SELECT 2 |
| Manufacturer note: Typical applications | For linear/area lighting in office and health care applications |
| Manufacturer note: Typical applications | Direct and indirect lighting application |
Operating points
| Point | Output current | Min./Max. forward voltage | Typ. current consumption | Output power | Typ. power consumption | Ambient temperature ta | tc point max | i-SELECT resistor value |
|---|---|---|---|---|---|---|---|---|
| 1 | 350.0 mA | 20 V; 50 V | 184 mA | 17.5 W; 17.5 W | 40.4 W | -25–60 °C | 80.0 °C | — |
| 2 | 400.0 mA | 20 V; 50 V | 206 mA | 20 W; 20 W | 45.7 W | -25–60 °C | 80.0 °C | 12.5 kΩ |
| 3 | 450.0 mA | 20 V; 50 V | 229 mA | 22.5 W; 22.5 W | 51.1 W | -25–60 °C | 80.0 °C | 11.11 kΩ |
| 4 | 500.0 mA | 20 V; 50 V | 251 mA | 25 W; 25 W | 56.4 W | -25–60 °C | 80.0 °C | 10 kΩ |
| 5 | 550.0 mA | 20 V; 50 V | 274 mA | 27.5 W; 27.5 W | 61.7 W | -25–60 °C | 80.0 °C | 9.09 kΩ |
| 6 | 600.0 mA | 20 V; 50 V | 296 mA | 30 W; 30 W | 67 W | -25–60 °C | 80.0 °C | 8.33 kΩ |
| 7 | 650.0 mA | 20 V; 50 V | 320 mA | 32.5 W; 32.5 W | 72.5 W | -25–60 °C | 80.0 °C | 7.69 kΩ |
| 8 | 700.0 mA | 20 V; 50 V | 343 mA | 35 W; 35 W | 78 W | -25–55 °C | 80.0 °C | 7.14 kΩ |
| 9 | 750.0 mA | 20 V; 50 V | 367 mA | 37.5 W; 37.5 W | 83.4 W | -25–55 °C | 80.0 °C | 6.67 kΩ |
| 10 | 800.0 mA | 20 V; 50 V | 390 mA | 40 W; 40 W | 88.9 W | -25–55 °C | 80.0 °C | 6.25 kΩ |
| 11 | 850.0 mA | 20 V; 50 V | 414 mA | 42.5 W; 42.5 W | 94.5 W | -25–55 °C | 80.0 °C | 5.88 kΩ |
| 12 | 900.0 mA | 20 V; 50 V | 438 mA | 45 W; 45 W | 99.7 W | -25–50 °C | 80.0 °C | 5.56 kΩ |
| 13 | 950.0 mA | 20 V; 50 V | 462 mA | 47.5 W; 47.5 W | 105.6 W | -25–50 °C | 80.0 °C | 5.26 kΩ |
| 14 | 1000.0 mA | 20 V; 50 V | 488 mA | 50 W; 50 W | 111.4 W | -25–50 °C | 80.0 °C | 5 kΩ |
| 15 | 1050.0 mA | 20 V; 47.6 V | 488 mA | 50 W; 50 W | 111.6 W | -25–50 °C | 80.0 °C | Short circuit (0 kΩ) |
The Vmin/Vmax and CC operating-window filter features represent the global envelope of all documented settings. The complete operating-point table defines the permitted voltage at each current setting.
Installation / application
Select LED modules by comparing their forward voltage and current with the operating window at the chosen setting. Maximum tc and permissible ambient temperature apply under the conditions stated for each operating point.
Additional information
Warranty and declared lifetime are subject to manufacturer conditions. Other family versions do not establish the contents of this article; assess its exact model designation and assigned photographs together.
Main source of information: www.tridonic.com
We make every effort to ensure that the information presented in this product description is complete, up to date and consistent with source documentation. However, product ranges and specifications may evolve and be updated, and some changes may not yet be reflected in our description. Inaccuracies or errors may also occur in the source documentation itself. If you have any doubts or notice an error, please contact us at bok@ledownia.pl.
zas_tridonic_28001912
Data sheet
- Power supply type
- Constant Current (CC)
- Rated power [W]
- 100
- Output Current of CC power supply [mA]
- 350-1050
- CC operating window
- 20-50
- Min. output voltage of led driver (CC)
- 20
- Max. output voltage of led driver (CC)
- 50
- Dimming / Control
- DALI, switchDIM
- Dimensions (L x W x H) [mm]
- 360 × 40 × 21 mm
- IP grade
- 20
- Length [mm]
- 360
- Width [mm]
- 40
- Height/thickness [mm]
- 21
- Warranty [years]
- 5
- Input voltage [V]
- 220-240
- Min. current of CC driver [mA]
- 350
- Max. current of CC driver [mA]
- 1050
- Power factor
- 0.98
Related products
