LED strip SMD 3528 12V 4.8W/m RGB 60LED/m IP65 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 3528 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip requires a PWM controller supporting the 3 control channels used by the RGB configuration.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

An RGB LED strip uses three independent color channels: red, green, and blue. By adjusting their relative brightness levels, it is possible to produce a very wide range of colors, including smooth color transitions, dynamic lighting effects, and white light created by activating all three channels simultaneously. Red, green, and blue are the primary colors of the additive color model, and the characteristics of red, green, and blue LEDs are stable, repeatable, and well understood — which is why these particular colors are used.

The strip requires a compatible 3-channel RGB controller that independently regulates the intensity of each color channel, most commonly using PWM modulation. Different output colors — other than the three primary colors — are obtained by varying the relative intensity of the red, green, and blue channels. Depending on the controller used, the user can select colors, adjust brightness, and activate predefined lighting scenes and dynamic effects.

RGB LED strips are designed primarily for decorative, effect, and ambient lighting of interiors, furniture, ceilings, display cases, and architectural elements.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP65 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED strip 300LED SMD 3528 RGB IP65 for premium accent lighting

Bring color and atmosphere to any space with the LED strip 300LED SMD 3528 RGB IP65. It uses 300 SMD 3528 LEDs for smooth, consistent light. RGB technology lets you create scenes, mood lighting, and dynamic effects. The IP65 coating helps protect the strip from splashes and moisture. It is a smart choice for premium-looking installations at home or in business spaces.

Where to use an RGB LED strip IP65

This strip works best as accent lighting. Install it in straight lines for a clean, modern look. For the most premium finish, place it inside an aluminum profile. The profile improves cooling and protects the strip.

• Under-cabinet lighting and kitchen worktops
• Shelves, niches, and display cases
• Ceilings, coves, and decorative wall details
• Shop windows, signage, and exhibition stands
• Bathrooms and other splash-prone zones (IP65)

SMD 3528 LEDs and RGB color control

SMD 3528 diodes are known for stable, even light. RGB means you can mix colors and set programs. To use full RGB control, add a compatible controller. Choose the controller for your strip voltage and control method.

Power supply choice and voltage drop

Use a constant-voltage power supply matched to the total load. Add 20–30% power reserve for safety and long life. Pick a unit with protections like OVP, OCP, SCP, and OTP. For longer runs, feed power at extra points to reduce voltage drop. As a rule, power every 5 m for 12V systems, or every 10 m for 24V systems.

Installation tips for LED strip 300LED SMD 3528 RGB IP65

Clean and degrease the surface before mounting. Use the adhesive backing for quick installs. In demanding areas, use an aluminum profile. Cut only at marked cut points. Connect with soldering or quality connectors. Seal connections if moisture is present. The LED strip 300LED SMD 3528 RGB IP65 looks best with neat corners and tidy wiring.

FAQ

Which power supply should I choose?
Calculate total wattage and add 20–30% reserve. Choose a model with OVP/OCP/SCP/OTP protections.

When do I need additional power injection?
When the run is long or brightness drops. Feed power about every 5 m (12V) or 10 m (24V).

Can I cut and reconnect the strip?
Yes, cut only at cut marks. Soldering is the most reliable method.

Complete your set and order today

Choose a controller, power supply, and aluminum profile for a premium result. Order your LED strip 300LED SMD 3528 RGB IP65 at LEDownia.pl and build your color lighting today.

See also: LED strips | LED power supplies | LED controllers and dimmers