LED strip SMD 5050 12V 14.4W/m RGBCW 60LED/m IP33 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 5050 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip requires a PWM controller supporting the 4 control channels used by the RGBCW configuration.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

An RGBW LED strip combines three independent color channels — red, green, and blue — with an additional channel of native white light produced by a phosphor-converted LED. Unlike a standard RGB strip, white light is not simulated by mixing the three colors, but generated by dedicated white LEDs, making it more natural, efficient, and suitable for functional lighting as well.

Depending on the version, the additional channel may emit warm white light — RGBWW, neutral white — RGBNW, or cool white — RGBCW. The designation RGBW is also commonly used as a general term for this four-channel family of LED strips.

The strip requires a compatible 4-channel RGBW controller that independently regulates the R, G, B, and W channels, most commonly using PWM modulation. This allows the user to select colors, adjust brightness, activate dynamic effects, and use a full-quality white light channel.

RGBW LED strips combine decorative color lighting with practical white illumination. They are intended for advanced lighting installations in furniture, ceilings, recesses, display cases, and architectural features where a single system is expected to provide both color scenes and everyday functional lighting or illumination.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP33 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

Premium RGB+CCT LED strip for clean, vivid lighting

LED strip 300LED SMD 5050 RGB + cool white Premium is made for users who want color effects and crisp task light. It balances LED density and power draw for everyday installations. The 5050 SMD package delivers stable color and strong output. Use it for profiles, accent lines, and modern interior details.

Why choose this LED strip 300LED SMD 5050 RGB + cool white Premium?

• RGB + cool white for mood lighting and clean, neutral-looking illumination.
• 300 LEDs for smooth light lines and reduced spotting in profiles.
• Premium components for consistent color and reliable operation.
• Cuttable sections for precise fit in furniture and architectural details.

Best use cases

• cabinet, shelf, and niche lighting
• ceilings, coves, and aluminum profiles
• showcases, signage, and display accents
• kitchens, offices, and modern workspaces

Power supply and voltage drop (12V/24V)

Choose a constant-voltage power supply matched to total load. Add a 20–30% power reserve for safe, cool operation. Look for protections like OVP, OCP, SCP, and OTP. Models with active PFC improve stability and work culture.

For longer runs, use power injection to avoid dimming. Feed power about every 5 m for 12V setups. Feed about every 10 m for 24V setups. Use a star wiring layout and proper cable gauge. Seal connections for outdoor or humid locations.

Installation and finishing

Mount the strip on a clean, degreased surface. Use aluminum profiles for better cooling and a smoother light line. You can cut only at marked points. Connect with soldering or quality connectors. Keep bends gentle to protect the copper traces.

FAQ

Which power supply should I buy?
Sum the wattage of all sections and add 20–30% reserve. Choose a unit with OVP/OCP/SCP/OTP protections.

When do I need power injection?
Use it for long runs or higher loads. Extra feeds keep brightness even across the full length.

Can I cut and reconnect the strip?
Yes, only at cut marks. Soldering gives the most durable connection.

Order with confidence

Upgrade your setup with a LED strip 300LED SMD 5050 RGB + cool white Premium and get premium-grade light in minutes. Add a matching power supply and controller, then order today at LEDownia.pl.

See also: Other LED strips | LED power supplies | Controllers & dimmers