LED strip SMD 3528 24V 4.8W/m warm white 60LED/m IP33 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 3528 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip can be powered directly from a suitable 24V power supply. An optional PWM controller enables brightness adjustment.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 10m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 10m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

The presented white LED strip is a single-channel light source with a color temperature of 3000K. All LEDs emit the same color and are controlled simultaneously, providing uniform and stable illumination.

In most white LEDs, light is produced through a phosphor-conversion process. A blue semiconductor chip emits short-wavelength radiation, part of which is converted by a phosphor layer into longer-wavelength visible light. The combination of the original blue light and the radiation emitted by the phosphor creates a broad spectrum perceived by the human eye as white light.

The composition and proportions of the phosphor materials make it possible to control the color temperature, tint, luminous efficacy, and color rendering quality with high precision. In high-quality LEDs, a properly engineered spectrum can faithfully reproduce the natural appearance of illuminated objects and colors, bringing the character of the emitted light close to daylight or traditional incandescent lighting. Particularly important factors include a high color rendering index, the correct balance of spectral components, and strict LED binning for color consistency. As a result, in typical applications, the light produced by a high-quality LED strip can be visually very difficult to distinguish from that of natural or traditional light sources.

During operation, an LED ages gradually rather than failing suddenly through a conventional “burnout.” The most commonly observed process is a slow reduction in luminous flux over time. High operating temperatures can accelerate degradation of the semiconductor structure, phosphor, package materials, and electrical connections. Over time, the phosphor may lose some of its conversion efficiency, while optical materials may become discolored, leading to a slight shift in color temperature or chromaticity coordinates.

In high-quality LED strips, this aging process is slow, uniform, and predictable. Proper thermal management, stable power supply, and installation in a suitable aluminum profile reduce the operating temperature, helping to preserve the original brightness and light color for many years.

For static operation, the strip does not require a controller — a correctly selected power supply is sufficient. Brightness adjustment requires a compatible single-channel LED dimmer or controller, most commonly using PWM modulation.

LED strip - product overview

The strip operates at 24V and has a density of 60LED/m with an IP33 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 24V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED strip 300LED SMD 3528 24V biała ciepła Premium is built for clean, cozy light and reliable work on longer runs. The 24V supply reduces voltage drop, so brightness stays more even across the strip. SMD 3528 LEDs provide a stable warm white tone that looks natural in living spaces. This warm white LED strip 24V is a strong choice for profiles, furniture, and subtle architectural accents.

Why choose a warm white LED strip 24V?

Warm white creates a comfortable atmosphere and soft highlights. The 24V system helps keep light consistent, especially on longer sections. Premium components improve durability and everyday performance. This model balances diode density and power draw for versatile installations.

LED strip 300LED SMD 3528 24V biała ciepła Premium — key benefits

• 300 LEDs per strip for smooth, even illumination
• SMD 3528 technology for stable color and predictable output
• 24V input to reduce voltage drop on longer lengths
• Great match for aluminum profiles and accent lighting
• Premium-grade selection for consistent quality

Applications for LED strip lighting

• Cabinets, shelves, and niches
• Ceiling coves and decorative lines in aluminum profiles
• Display lighting, signage, and showcases
• Architectural accents and under-eave highlights

Power supply, protection, and power injection

Choose a constant-voltage PSU with 20–30% power reserve. Look for protections like OVP, OCP, SCP, and OTP. Active PFC can improve stability and working culture. For longer runs, use power injection to maintain brightness. With 24V, add power roughly every 10 m when needed.

Warm white LED strip 24V installation tips

Mount the strip on a clean surface for best adhesion. Aluminum profiles improve cooling and extend lifespan. Cut only at marked cut points. Connect by soldering or quality connectors. Protect joints from moisture in outdoor or humid areas. For demanding setups, this premium LED tape 3528 works best with correct wiring and cable gauge.

FAQ

Which power supply should I choose?
Calculate total wattage and add 20–30% headroom. Pick a PSU with OVP/OCP/SCP/OTP protections.

When do I need power injection?
Use it for long sections or when you notice dimming. With 24V, injection around every 10 m often helps.

Can I cut and reconnect the strip?
Yes, cut at marked points. Use proper soldering tools or reliable connectors.

Ready to upgrade your lighting? Choose LED strip 300LED SMD 3528 24V biała ciepła Premium and order today from LEDownia.pl.

See also: Other LED strips | LED power supplies | Controllers & dimmers