LED strip SMD 3528 12V 4.8W/m cool white 60LED/m 360lm/m IP65 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 3528 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip can be powered directly from a suitable 12V power supply. An optional PWM controller enables brightness adjustment.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

The presented white LED strip is a single-channel light source with a color temperature of 6000K. All LEDs emit the same color and are controlled simultaneously, providing uniform and stable illumination.

In most white LEDs, light is produced through a phosphor-conversion process. A blue semiconductor chip emits short-wavelength radiation, part of which is converted by a phosphor layer into longer-wavelength visible light. The combination of the original blue light and the radiation emitted by the phosphor creates a broad spectrum perceived by the human eye as white light.

The composition and proportions of the phosphor materials make it possible to control the color temperature, tint, luminous efficacy, and color rendering quality with high precision. In high-quality LEDs, a properly engineered spectrum can faithfully reproduce the natural appearance of illuminated objects and colors, bringing the character of the emitted light close to daylight or traditional incandescent lighting. Particularly important factors include a high color rendering index, the correct balance of spectral components, and strict LED binning for color consistency. As a result, in typical applications, the light produced by a high-quality LED strip can be visually very difficult to distinguish from that of natural or traditional light sources.

During operation, an LED ages gradually rather than failing suddenly through a conventional “burnout.” The most commonly observed process is a slow reduction in luminous flux over time. High operating temperatures can accelerate degradation of the semiconductor structure, phosphor, package materials, and electrical connections. Over time, the phosphor may lose some of its conversion efficiency, while optical materials may become discolored, leading to a slight shift in color temperature or chromaticity coordinates.

In high-quality LED strips, this aging process is slow, uniform, and predictable. Proper thermal management, stable power supply, and installation in a suitable aluminum profile reduce the operating temperature, helping to preserve the original brightness and light color for many years.

For static operation, the strip does not require a controller — a correctly selected power supply is sufficient. Brightness adjustment requires a compatible single-channel LED dimmer or controller, most commonly using PWM modulation. Luminous flux of the LED strip is 6lm/m.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP65 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

Cool white LED strip IP65 for clean, bright accents

This cool white LED strip IP65 uses 300 SMD 3528 LEDs to deliver crisp, modern light. Each diode provides about 6 lm, so you get a strong balance between brightness and power use. The cool white tone improves contrast and clarity in work areas. It works great in kitchens, offices, showcases, and modern interiors. The cool white LED strip IP65 also suits locations exposed to moisture or splashes. It is a premium choice for reliable, long-term lighting.

Main benefits of the cool white LED strip IP65

• SMD 3528 technology for stable color and consistent output
• 300 LEDs for even light distribution in profiles and recesses
• IP65 protection against dust and water jets
• Cuttable sections for easy fitting to your project
• Great for accent lighting and functional task lighting

Where to use a waterproof LED strip for outdoor use

Use it under cabinets, inside shelves, in niches, and in aluminum profiles. It also works for signage, displays, and architectural accents. Thanks to IP65, it is suitable for demanding zones. This includes bathrooms or covered outdoor areas. A waterproof LED strip for outdoor use should always have sealed connections.

Power supply and voltage drop tips

Choose a constant-voltage power supply matched to total wattage. Add a 20–30% power reserve for stability and longer life. Look for protections like OVP, OCP, SCP, and OTP. Active PFC models can improve efficiency and operation.

For longer runs, add power injection to avoid dimming. Feed power about every 5 m for 12V systems. For 24 V systems, feed about every 10 m. Use a star wiring layout when possible. Select wire gauge to match current and length.

Installation and finishing

Mounting is fast with the adhesive backing. For best thermal performance, use an aluminum profile. Cut only at marked cut points. Connect with soldering or quality connectors. For outdoor mounting, seal joints against moisture.

FAQ

Which power supply should I choose?
Sum the power of all sections and add 20–30%. Pick a unit with OVP/OCP/SCP/OTP protections.

When do I need power injection?
Use it on long runs or when you see voltage drop. It keeps brightness even across the strip.

Can I cut and reconnect the strip?
Yes, cut at the marked points. Use proper soldering temperature or reliable connectors.

Order from LEDownia.pl

Build a clean, modern lighting effect with a premium strip that lasts. Choose your length, match the right power supply, and complete your setup today. Order now and upgrade your space with confidence.

See also: Other LED strips | LED power supplies | Controllers & dimmers