LED strip SMD 3528 230V 4.8W/m neutral white 60LED/m IP67 10m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 3528 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip can be powered directly from a suitable 230V power supply. An optional PWM controller enables brightness adjustment.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Light emitted by LED strip

The presented white LED strip is a single-channel light source with a color temperature of 4000K. All LEDs emit the same color and are controlled simultaneously, providing uniform and stable illumination.

In most white LEDs, light is produced through a phosphor-conversion process. A blue semiconductor chip emits short-wavelength radiation, part of which is converted by a phosphor layer into longer-wavelength visible light. The combination of the original blue light and the radiation emitted by the phosphor creates a broad spectrum perceived by the human eye as white light.

The composition and proportions of the phosphor materials make it possible to control the color temperature, tint, luminous efficacy, and color rendering quality with high precision. In high-quality LEDs, a properly engineered spectrum can faithfully reproduce the natural appearance of illuminated objects and colors, bringing the character of the emitted light close to daylight or traditional incandescent lighting. Particularly important factors include a high color rendering index, the correct balance of spectral components, and strict LED binning for color consistency. As a result, in typical applications, the light produced by a high-quality LED strip can be visually very difficult to distinguish from that of natural or traditional light sources.

During operation, an LED ages gradually rather than failing suddenly through a conventional “burnout.” The most commonly observed process is a slow reduction in luminous flux over time. High operating temperatures can accelerate degradation of the semiconductor structure, phosphor, package materials, and electrical connections. Over time, the phosphor may lose some of its conversion efficiency, while optical materials may become discolored, leading to a slight shift in color temperature or chromaticity coordinates.

In high-quality LED strips, this aging process is slow, uniform, and predictable. Proper thermal management, stable power supply, and installation in a suitable aluminum profile reduce the operating temperature, helping to preserve the original brightness and light color for many years.

For static operation, the strip does not require a controller — a correctly selected power supply is sufficient. Brightness adjustment requires a compatible single-channel LED dimmer or controller, most commonly using PWM modulation.

LED strip - product overview

The strip operates at 230V and has a density of 60LED/m with an IP67 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 10m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 230V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED strip 230V IP67 neutral white for clean, even light

Choose the LED strip 230V IP67 neutral white when you need smooth illumination without visible dots. This premium-grade strip is built for stable performance and a professional finish. Neutral white gives balanced light that renders colors naturally. It works well for everyday use and task lighting. The IP67 seal helps protect the strip in demanding indoor areas and outdoor locations. The 230V version includes integrated power electronics. Use only dedicated AC-rated accessories and follow electrical safety rules.

Where it works best

• Aluminum profiles, coves, and ceiling accents
• Furniture lighting for shelves, niches, and displays
• Signage, showcases, and commercial presentations
• Outdoor architectural details where IP67 is required

IP67 LED strip for profiles: simple installation

This IP67 LED strip for profiles can be cut only at marked cutting points. Join sections with proper connectors or soldering. A quality aluminum profile improves heat management and helps maintain long-term brightness. Seal connections carefully for outdoor use. Keep cable runs tidy and protected from moisture.

LED strip 230V IP67 neutral white: safety and power tips

The LED strip 230V IP67 neutral white is designed for mains voltage. Always use AC-compatible connectors and mounting parts. Do not connect it like low-voltage strips. If you plan longer runs, design the layout to keep brightness consistent. Use correct wire gauge and secure all joints. When in doubt, ask for technical support before installation.

Key benefits

• Dot-free, uniform light for a premium look
• Neutral white color for natural, comfortable illumination
• IP67 protection for tougher environments
• Integrated power solution in the 230V model

FAQ

• Can I cut the strip? Yes, only at the marked cutting points.
• Is it suitable outdoors? IP67 helps, but protect and seal every connection.
• Do I need a separate power supply? This 230V version has integrated power electronics.

Order today

Upgrade your project with a LED strip 230V IP67 neutral white and enjoy premium-quality light. Add it to cart and order now at LEDownia.pl.

See also: Other LED strips | LED power supplies | Controllers & dimmers