LED strip SMD 3528 12V 3000K 60LED/m 360lm/m IP65 5m

LED Strip - Construction

The strip uses SMD technology with LEDs in a 3528 package. The underside has factory-applied double-sided adhesive tape to aid installation on a suitably prepared surface.

Control of LED strip

The strip can be powered directly from a suitable 12V power supply. An optional PWM controller enables brightness adjustment.

Important information

The stated power is a rated or theoretical value based on the parameters of the components used. Actual power consumption may be lower due to component tolerances, voltage drop and operating conditions.

Power and installation

The strip does not require an additional power-injection point when its length does not exceed 5m. Above this length, consider starting the next separately powered run, supplying the run at its far end, or adding another power point after the indicated length.

The 5m value is based on the electrical properties of the strip PCB. It indicates the length at which supply-voltage drop should not cause a noticeable reduction in LED brightness along the length of strip. Above this length, a brightness difference may become visible. If it remains acceptable to the end customer, the final power-feed arrangement is the responsibility of the installation designer or user.

Light emitted by LED strip

The presented white LED strip is a single-channel light source with a color temperature of 3000K. All LEDs emit the same color and are controlled simultaneously, providing uniform and stable illumination.

In most white LEDs, light is produced through a phosphor-conversion process. A blue semiconductor chip emits short-wavelength radiation, part of which is converted by a phosphor layer into longer-wavelength visible light. The combination of the original blue light and the radiation emitted by the phosphor creates a broad spectrum perceived by the human eye as white light.

The composition and proportions of the phosphor materials make it possible to control the color temperature, tint, luminous efficacy, and color rendering quality with high precision. In high-quality LEDs, a properly engineered spectrum can faithfully reproduce the natural appearance of illuminated objects and colors, bringing the character of the emitted light close to daylight or traditional incandescent lighting. Particularly important factors include a high color rendering index, the correct balance of spectral components, and strict LED binning for color consistency. As a result, in typical applications, the light produced by a high-quality LED strip can be visually very difficult to distinguish from that of natural or traditional light sources.

During operation, an LED ages gradually rather than failing suddenly through a conventional “burnout.” The most commonly observed process is a slow reduction in luminous flux over time. High operating temperatures can accelerate degradation of the semiconductor structure, phosphor, package materials, and electrical connections. Over time, the phosphor may lose some of its conversion efficiency, while optical materials may become discolored, leading to a slight shift in color temperature or chromaticity coordinates.

In high-quality LED strips, this aging process is slow, uniform, and predictable. Proper thermal management, stable power supply, and installation in a suitable aluminum profile reduce the operating temperature, helping to preserve the original brightness and light color for many years.

For static operation, the strip does not require a controller — a correctly selected power supply is sufficient. Brightness adjustment requires a compatible single-channel LED dimmer or controller, most commonly using PWM modulation. Luminous flux of the LED strip is 6lm/m.

LED strip - product overview

The strip operates at 12V and has a density of 60LED/m with an IP65 ingress-protection rating.

Sales unit of led strip

The sales unit includes a factory-prepared reel of LED strip with a length of 5m.

LED strip - power supply selection

The strip requires a power supply with an output voltage of 12V. Guidance: select a power supply with an optimum 30% power reserve above the LED strip demand.

LED strip 300LED SMD 3528 warm white IP65 for clean, cozy light

Choose a LED strip 300LED SMD 3528 warm white IP65 when you want reliable accent lighting and a pleasant, warm tone. This model balances diode density and power draw. It works well in many interiors. The SMD 3528 technology delivers stable color and consistent output. The IP65 coating helps protect against dust and water splashes.

Where it works best

• Cabinets, shelves, niches, and furniture backlighting
• Ceilings, coves, and aluminum profiles
• Signage, displays, and retail highlights
• Kitchens and bathrooms where splash resistance matters

Why this LED strip 300LED SMD 3528 warm white IP65 is a premium choice

This LED strip 300LED SMD 3528 warm white IP65 is built for everyday use and clean installation. The warm white color creates a welcoming mood in living rooms and bedrooms. Use it for subtle accents or continuous lines of light. For best results, mount it in an aluminum profile. It improves cooling and keeps the line straight.

Power supply and voltage drop tips

Use a constant-voltage LED power supply matched to total wattage. Add a 20–30% safety margin. Choose units with protections like OVP, OCP, SCP, and OTP. Active PFC models can improve stability and work culture.

For longer runs, use power injection to reduce voltage drop. Feed power about every 5 m for 12V systems. Feed power about every 10 m for 24 V systems. Run wiring in a star layout when possible. Seal outdoor connections against moisture.

Installation, cutting, and the SMD 3528 LED strip option

The IP65 layer supports splash resistance, not full submersion. Cut only at marked cut points. Connect with soldering or quality connectors. This LED strip 300LED SMD 3528 warm white IP65 is ideal for profiles and neat architectural accents. If you compare options, this is also a solid SMD 3528 LED strip for stable, warm illumination.

FAQ

Which power supply should I choose?
Sum the wattage of all sections and add 20–30% headroom. Pick a premium unit with OVP/OCP/SCP/OTP protections.

When do I need power injection?
Use it for long runs or when brightness drops at the end. Add feed points every 5 m (12V) or 10 m (24 V).

Can I cut and reconnect the strip?
Yes, cut only at marked points. Use proper soldering temperature and insulated joints.

Explore more: Other LED strips | LED power supplies | Controllers & dimmers

Ready to upgrade your lighting? Order now at LEDownia.pl and get expert support for power and installation.